Car Gauge Lite

Create Custom Gauges and Connect the Application to your Vehicle's ECU at the 16 Pin OBD II Diagnostic Connecter. Most OBD II Connector location should be under the Steering Wheel Compartment. ELM 327 Bluetooth Adapter is Required to make this Application work.

Vehicle Computer System have multiple Signal Protocols and ELM 327 Supports many of them.  Currently, the following Protocols are supported by the App and MUST be an OBD II Compliant Vehicle.
* VPW - 1996-2004 Year (GM vehicles)
* PWM - 1996-2004 Year (Ford vehicles)
* ISO 9141(Slow) - 1996-2004 (Chrysler, European, and Asian vehicles)
* KWP 2000(Slow/Fast) - 1996-2004 (Chrysler, European, and Asian vehicles)

CAN Bus Systems (2004 and Newer) is not tested and supported at this time. Do a Google Search for a complete listing on the Vehicle Protocols.

Car Gauge Lite Supports the Following (Applies to Non CAN BUS System)
* Mode 1 - Analog Gauges (75% Generic Pids)
* Mode 2 - Freeze Frame Data
* Mode 3 - Read Faults
* Mode 4 - Clear Faults
* Mode 6 - Onboard Test
* Mode 7 - Read Pending Faults
* More to come and will be supporting CAN BUS Soon!

Car Gauge Pro is Now Available.

Notice:  Tested with ELM 327 Bluetooth Adapter (Least Expensive Adapter from Ebay) with Orange/Blue Color Tag and Black Color Case.  This Adapter have Known Issues with Data Corruptions as per testing.

Notice:  Any reports of hanging/freezing is caused by a bug in the Unit(Bluetooth InputStream) and currently the app has no workaround for it.

Notice:  Some of the Gauges on the Screenshots is currently not available to the public and it is imported from the SD Card.

Tip:  If App cannot Reconnect then try Unpairing/Pairing the Bluetooth Device. Some Phones may Require Restart.  I am working on this fix.

HARDWARE REQUIREMENT:  ELM 327 Bluetooth Adapter.  Orange/Blue Color Tag with Black Color Case made by TomTop have been tested successfully.

Requirement Android 2.0 or higher for Bluetooth to function properly.